The registration mark referred to in sub-section (6) of Section 41 shall be displayed both at the front and at the rear on all motor vehicles clearly and legibly on a plain surface of a plate or part of the vehicle not inclined to vertical by more than thirty degrees, at the front facing direct to the front and at the rear facing direct to the rear.
In the case of motorcycles, the registration mark in the front shall be displayed parallel to the handlebar or any part of the vehicle including mudguard facing the front instead of, on a plate in line with the axis of the vehicle.
The registration mark shall be exhibited in two lines, the State Code and registering authority code forming the first line and the rest forming the second line, one below the other:
Provided that the registration mark in the front may be exhibited in one line.
Provided further that in models of vehicles having no sufficient provision at the rear to exhibit the registration mark in two lines, it shall be sufficient if in such vehicles registration mark is exhibited in a single line.
Provided further that registration mark on a light motor vehicle may be in the centre with illumination.
Every motor vehicle, except motor cab and motor car, manufactured on and from the date of commencement of the Central Motor Vehicles (Amendment )Rules, 1993 shall be provided with sufficient space in the rear for display of registration mark in two lines.
In case of agricultural tractors, the registration mark need not be inclined to the vertical by more that 30 degrees.
The registration mark of the drawings agricultural tractors may not be exhibited on the agricultural trailer or trailers.
The dimension of letters and figures of the registration mark and the space between different letters and numerals and letters and edge of the plain surface shall be as follows:
Provided that when the registration mark is exhibited in one horizontal line, there shall be a hypen between the letters (including code number of Registering Authority) and the numerals. The length and thickness of the hypen shall be not less than three-fourth and one-fourth of a centimeter respectively.
| Class of Vehicle | Type | Height (mm) | Thickness (mm) | Space Between (mm) |
|---|---|---|---|---|
| All motorcycles and three-wheeled invalid carriages | Rear-letters | 35 | 7 | 5 |
| All motorcycles and three-wheeled invalid carriages | Rear-numeral | 40 | 7 | 5 |
| Motorcycles with engine capacity less than 70cc | Front letters & numerals | 15 | 2.5 | 2.5 |
| Other motorcycles | Front letters & numerals | 30 | 5 | 5 |
| Three wheelers of engine capacity not exceeding 500 cc | Rear and front numerals | 35 | 7 | 5 |
| Three wheelers of engine capacity exceeding 500 cc | Rear and front numerals | 40 | 7 | 5 |
| All other motor vehicles | Rear and front letters and numerals | 65 | 10 | 10 |
| Power Tillers | Front letters and numerals | 15 | 2.5 | 2.5 |
| Trailers coupled to power tillers | Rear letters and numerals | 30 | 5 | 5 |